2012/10/31

Fireproof Glass


Categories: Fireproof Glass
Model:Fireproof Glass
Shape:Flat


As a special building material, Fireproof Glass has high light transmittance performance and fireproof performance of high-temperature resistance and flame retardant.
There is a few countries including France and Japan can produce it in the world.
Main performance:
It has good optical performance and its transparency is the same as common float glass.
Its intensity is 6 times as much as that of common float glass and it belongs to safety glass.
It can be assembled into various compound glass products.
Fireproof performance:
In most of modern buildings, their peripheral glass hasn't heat resistant and fireproof function. Once fire happens, the glass will burst in a short time and fire will be spread to bring about threat of life and property safety.
With Fireproof performance, Fireproof glass is a kind of construction outer wall glass. It adopts special means to handle float glass. Its two surfaces have the same fireproof effect which can ensure glass integrity with 90 minutes to effectively prevent blaze and fog spread to make people have enough time to leave the scene and disaster relief work. It overcomes the weak fireproof security of common glass to greatly enhance the security of outer wall glass.
High-intensity performance:
Fireproof glass not only has outstanding fireproof function but also has higher intensity. Contrast with the same thickness glass, its intensity is 6-12 times as much as that of common float glass and 1.5-3 times as much as that of tempered glass.
Application:
cinema, bank, hospital, large-sized marketplace and recreation grounds, etc.
Specification:
Min. size:300x300mm
Max. size:1200x2800mm
Quality:
According with national GB15763.1-2001 "Safety Glass and Fireproof Glass of Building" Standard.


KeyWords:



2012/10/29

Solar Energy Glass


Categories: Solar Energy Glass
Model:SOLAR PANEL GLASS
Comments:Solar glass, based on the original cover material used for solar cell module.

Based on the original cover material used for solar cell module, we make constant research and development on the cover material so as to improve the photo-electric conversion efficiency of the whole system. For the solar modules are always set in harsh outdoor environment, the surface is easy to be contaminated and become difficult to clean. In addition to increasing the transmittance of PV glass used for cover-plate, the glass surface must be easy to clean.

One side of the glass is smooth, coated with coating which can modified the property and reduce the tension, and the another side is empaistic. When encapsulation, put the smooth side face the sun and the texturized side face the solar cell. The ultra-clear patterned glass contains low Fe, and the patterns are various, so the refractivity is much better than ordinary ultra-clear glass.


KeyWords:

2012/10/27

Laminated Glass With Dupont PVB


Categories: Laminated Glass
Model:Laminated Glass with Dupont PVB
Function:Heat Absorbing Glass
Shape:Flat
Structure:Solid
Technique:Clear Glass, Laminated Glass, Tempered Glass
Type:laminated glass


Detailed Info
Laminated glass is produced by bonding two or more lites of glass on eigher side of a resilient interlayer(PVB or polyvinyl butyral) through beat and pressure.

Characteristic:
•Safety: Offers greater personal safety upon breakage as it tends to remain in place.
•Sound Control: In area such as airports, hotels, offices, control rooms and homes, laminated glass lets you see the world, not listen to it.The PVB interlayer damperns the transmission of outdoor noise. The PVB interlayer of each lite works with the units air space to maximize sound control.
• Protection from harmful UV light: The PVB interlayer used in laminated glass will screen out over 99% of the suns harmful rays and radiant heat will help protet drapes, carpet, upholstery and wall coverings from fading-another benefit of our laminated glass.
•Security: Laminated glass provides an element of security that cannot be achieved by other glass products. It can also be produced for bullet-resistant and blast-resistant applications.

Variety:
Common laminated glass, tempered-laminated sandwich glass, etc.
Specification:
Max: 2500x6000mm
Min: 300x300mm
Thickness: 6-80mm
Quality:
National standard of Peoples Republic of China(GB9962-1999)


KeyWords:


2012/10/25

Toughened Glass W/AS/NZS 2080 And 2208 Certificate


Categories: Tempered Glass
Model:toughened glass w/AS/NZS 2080 and 2208 certificate
Material:Glass


Tempered glass:
With good inflexible and heat resistant, it is up 3-6 times than a standard glass,and the press is more than 95 MPA; with good heat reliability, it can endure the temperature from 200-30000C, and for the standard one, it only can be 70-10000C. When broken, it only can be as small granules and will reduce the damage to personal and property to lowest.

Products specification
Max dimension: 3000 x 3660 mm
Min dimension:100 x 100 mm Thickness:4 - 19 mm

Products application:
window glass, curtain wall glass, the whole glass door, glass partition wall, bathroom glass, shopper window, escalator rail, building shielding etc.


KeyWords:


2012/10/24

Silk Screen Printing Glass


Categories: Silkscreen Printing Glass
Model:Silkscreen Printing Glass
Material:Glass
Color:black,white


Detailed Info

Silkscreen glass
is made by using inorganic color ink to print graphics through a special screen onto glass. Melt colorant into glass surface in a tempering furnace and non-fading, multicolor , graphic silkscreen glass is manufactured.

Features:

1.Various color and graphics choices Silkscreen glass offers variety in color and graphics which could also be custom-made to meet designing needs as well as create particularity of space design.
2. The partial printing of silkscreen glass reduces glare.
3. The sequential partial printing of silkscreen glass subdues westerly of direct sunlight.
4. Silkscreen glass is more durable, scratch-proof, moisture-resistant than ordinary color printed glass

Products specification:
Thickness: 2-9mm
Max size 1830*2440mm
Min size: 305mm x 305mm

Product application:
Architectural facade glass, window glass for shop, family and school, graplic glass for interior partition, electric glass, Furniture and art glass.


KeyWords:

2012/10/23

Low E Insulating Glass


Categories: Low E Insulated Glass
Model:Low-E insulated glass
Function:Heat Reflective Glass, Insulated Glass, Low-E Glass
Shape:Flat
Structure:Hollow
Technique:Clear Glass, Coated Glass, Tempered Glass
Type:double glazing
Color:clear,grey,green,etc.


Low-E Insulated glass is produced by combining various thickness, coatings and tints, architects can create buildings that are energy efficient and reflect the beauty of their surroundings. Air-to-air heat transfer is the greatest cause of heat and cooling losses through windows in the home. Insulating units reduce this air to air transfer. The air space between the lites of glass provides insulation that will allow homeowners to enjoy increased personal comfort and energy conservation while reducing sound transmission and energy costs. We can manufacture insulation units in a variety of angles, shapes and patterns, utilizing the features of tinted glass and low-emissivity glass to maximize performance in your windows.

Structure:
Insulating glass unit consists of two or more lites of glass being separated by a high-quality spacer and air space which has been scaled by an organic compound and kept continuallydehydrated by a specially formulated drying agent inside the spacer screen. If you want to further enhance thermal-insulated and sound-insulated property, you may fill inert gas in the space.

Characteristics:
·Reducing heating and cooling costs by reducing air-to-air heat transfer.
·Reducing condensation.
·Reducing sound transmission
·Increasing personal comfort and aids in energy conservation.
·Increasing strength for higher windload requirements.

Specification:
Max: 2500x3500mm
Min: 180x350mm
Thickness of Aluminum Frame: 6mm, 9mm, 12mm, 16mm etc.


KeyWords:


2012/10/22

500 Hybrid Waterproof Roofing Underlayment


Categories: Roofing Underlayments
Brand:GreenCity
Model:BuildingTop Guard 500 Hybrid Waterproof Roofing Unde
Comments:8-layer


Detailed Info
This is an 8-layer laminated roofing underlayment consists of multiple layer of asphalt, synthetic fiber, Non-woven, and HDPE, provides a vital second layer of protection on top of the building for waterproofing, and to prevent roof damage from rain or snow. Its construction results in high strength, low weight, unmatched tear resistance and long life tendency also almost half the cost of other synthetic underlayments.
Applications:
- to serve as an essential part of the roofing system
- to serve as a temporary roofing cover during construction
- to serve as a safety "net"

Products Technical Parameters 
Property of per roll
Normal Value
North America
Europe
length
145ft
44 m
width
3.1 ft
0.95m
weight
>=50lbs
22 kg
Tensile strength N/200mm
CD>=300N
MD>=300N
Tensile tear strength
CD>=1500gf
MD>=1500gf
Low temperature flexibility
<=14ꇣF
-10ꇣC
heat resistance
>=260ꇣF
126ꇣC
Top surface
Black color with trade mark printed
Bottom surface
Plain black color

Testing Report for BuildingTopGuard 500 
Testing Report for BuildingTopGuard 500
No.
VARIABLE
MEASURED 
BY
UNIT
NOMINAL
1A.
Roll weight(w/o core) - 4.5 square

lbs.
49.5
1B.
Roll weight(with core) - 4.5 square

lbs.
50
2
Roll length - 4.5 square
ASTM D-412
ft.
144
3
Width
ASTM D-412
inch
37.3
4
Tensile strength - MD
ASTM D-751
lbs/in
388
5
Tensile strength - CMD
ASTM D-751
lbs/in
260
6
Tensile strength - MD(Elmendorf)
ASTM D-1922
lbs
3.0
7
Tensile strength - CMD(Elmendorf)
ASTM D-1922
lbs
5.4
8
Trapezoidal Tear strength -MD
ASTM D-4533
lbs
26
9
Trapezoidal Tear strength -CMD
ASTM D-4533
lbs
22
10
Water shower test
ASTM D-4869
Pass/Fail
Pass
11
Water vapor transmission rate
ASTM E 96-B
Perms
0.13
12
Pliability at 14F for 24 hours
AC207
Pass/Fail
Pass
13
3/8" dia. Head nail pull-through
D-3462
lbs
56
14
7/16" crown staple pull-through
D-3462
lbs
30
15
Accelerated aged TENSILE strength -MD
AC 188
(ASTM D-751)
lbs/in
91
16
Accelerated aged TENSILE strength -CMD
AC 188
(ASTM D-751)
lbs/in
78
17
Accelerated aged TENSILE strength -MD
ASTM D-1922
lbs
2.63
18
Accelerated aged TENSILE strength -CMD
ASTM D-1922
lbs
3.80
19
Accelerated aged TENSILE strength -MD
AC 188
(ASTM D-751)
lbs/in
TBD
(7/12/07)
20
Accelerated aged TENSILE strength -CMD
AC 188
(ASTM D-751)
lbs/in
TBD
(7/12/07)
21
Loss on heating at 221F for 5 hours
ASTM D-146/
D-226
%
4.1
22
Dimensional stability - low humidity
ASTM D-4869
(F-1087)
%
0.38
23
Dimensional stability - high humidity
ASTM D-4869
(F-1087)
%
0.38
24
Static coefficient of friction -Dry(1)
ASTM D-1894
~
0.80
25
Static coefficient of friction -Wet(1)
ASTM D-1894
~
0.78
26
Dynamic coefficient of friction -Dry(1)
ASTM D-1894
~
0.69
27
Dynamic coefficient of friction -Wet(1)
ASTM D-1894
~
0.76
28
Surface defects
Visual
Without pinholes, wrinkles, tension bands,
stretch marks or other blemishes



KeyWords:


2012/10/21

Clear Insulated Glass


Categories: Insulated Glass
Model:Insulated glass
Function:Heat Absorbing Glass, Heat Reflective Glass, Insulated Glass, Low-E Glass
Shape:Curve, Flat
Structure:Hollow
Technique:Clear Glass, Coated Glass, Tempered Glass, Tinted Glass
Color:clear,grey,etc.


Detailed Info
Insulated glass is a multi-glass combination consisting of two or more panes enclosing a hermetically-sealed air space. The most important function of insulation glass is to reduce thermal losses, which offers many advantages: lower energy consumption, perfect transparency by reducing the incidence of condensation on the warm air side and the possibility of using larger glazed areas without increasing energy consumption.
Low-e glass can be used for more energy saving, also with/without argon.
Product specification:
The largest size: 2500*3550mm
Minimum dimension: 200*400mm
Total thickness of the empty glass: 10-40mm
Thickness of alum frame: 6mm, 9mm, 12mm, nonstandard
Products application:
Door, window, curtain wall, enclosure, skylight and printing opacity roofing of the industry civil building, etc. Waiting room of the airport, rolling stock, freezer where have constant temperature request.


KeyWords:


2012/10/18

Laminated Glass With Dupont PVB


Categories: Laminated Glass
Model:Laminated Glass with Dupont PVB
Function:Bulletproof Glass, Heat Absorbing Glass
Shape:Flat
Structure:Solid
Technique:Clear Glass, Laminated Glass, Tempered Glass
Type:laminated glass
PVB Color:grey,milky,green,blue,bronze,etc.


Detailed Info
Laminated glass is produced by bonding two or more lites of glass on eigher side of a resilient interlayer(PVB or polyvinyl butyral) through beat and pressure.

Characteristic:
•Safety: Offers greater personal safety upon breakage as it tends to remain in place.
•Sound Control: In area such as airports, hotels, offices, control rooms and homes, laminated glass lets you see the world, not listen to it.The PVB interlayer damperns the transmission of outdoor noise. The PVB interlayer of each lite works with the units air space to maximize sound control.
• Protection from harmful UV light: The PVB interlayer used in laminated glass will screen out over 99% of the suns harmful rays and radiant heat will help protet drapes, carpet, upholstery and wall coverings from fading-another benefit of our laminated glass.
•Security: Laminated glass provides an element of security that cannot be achieved by other glass products. It can also be produced for bullet-resistant and blast-resistant applications.
Variety:
Common laminated glass, tempered-laminated sandwich glass, etc.
Specification:
Max: 2500x6000mm
Min: 300x300mm
Thickness: 6-80mm
Quality:
National standard of Peoples Republic of China(GB9962-1999)




2012/10/15

Automatic glass cutting machine for shaped glass


Categories: Glass Cutting Machine
Brand:BSJ
Model:Automatic glass cutting machine for shaped glass
Comments:BSJN series CNC cutting machine is designed to cut out any shapes of glass.


Detailed Info
BSJN series CNC cutting machine is designed to cut out any shapes of glass.

Features:

1.The three-coordinates moving system of the cutting head consists of the high precision rack and rail, Siemens AC servo system and the imported coder. The system enables the machine high reliability, high efficiency and high precision.

2.Fully automatic process controlled by computer from glass input to glass cutting.

3.The cutting pressure can be automatically adjusted according to the cutting speed.

4.The cutting programs of standard patterns and the combinations enable users to cut any ordinary shapes of glass.


KeyWords:


2012/10/12

Automatic Glass Cutting Machine For Straight Line


Categories: Glass Cutting Machine
Brand:BSJ
Model:automatic glass cutting machine for straight line
Comments:BSJN series CNC cutting machine is designed to cut out any shapes of glass.


Detailed Info

BSJN series CNC cutting machine is designed to cut out any shapes of glass.
Features:
1.The three-coordinates moving system of the cutting head consists of the high precision rack and rail, Siemens AC servo system and the imported coder. The system enables the machine high reliability, high efficiency and high precision.
2.Fully automatic process controlled by computer from glass input to glass cutting.
3.The cutting pressure can be automatically adjusted according to the cutting speed.
4.The cutting programs of standard patterns and the combinations enable users to cut any ordinary shapes of glass.


KeyWords:


2012/10/10

1200mm glass washing machine


Categories: Glass Washing Machine
Brand:BSJ
Model:1200mm glass washing machine
Comments:for the washing and drying of small pieces glass, like household glass.


Detailed Info
for the washing and drying of small pieces glass, like household glass, decorative glass, lamp glass and appliance glass, etc.
The machine is equipped with 4 pairs of brushes for washing, 3 pairs of absorbent rollers and warm air for drying.

Main featrues:

1.Water recycling system

Control center for thickness & speed adjustment, etc.

Specification

Glass Thickness: 3-8 (mm);

Min. Glass Size: 150*150 (mm);

Max. Width: 1200;

Transfer Speed: 0.6-5m/min;

Power: 12kw

Dimension: 3000*1488*1100(mm)(L*W*H)


KeyWords:


2012/10/08

Glass cutting machine production line


Categories: Glass Processing Line
Brand:BSJ
Model:Glass cutting machine production line
Comments:CNC Auto Glass Cutting Machine Production Line is composed with a loadint table, a CNC cutting table and a breaking table.


Detailed Info
CNC Auto Glass Cutting Machine Production Line is composed with a loadint table, a CNC cutting table and a breaking table.
The CNC cutting machine could be changed to semi-auto cutting machine.
Loading time: 45-65 seconds (adjustable)
Glass thickness: 3-19mm
Glass size: 300-6000mm
BSJN3725

description: could cut different shapes, could optimize the layout with optimization software

cutting speed: 0-100m/min

glass thickness: 2-19mm

max. glass size: 3660*2440mm

min. cutting size: 20*20mm

parellel tolerance: ±0.15mm/m

diagonal tolerance: ±0.20mm/m

dimension: about 4000*2500*1350mm

weight: about 2500kgs
Breaking table
description: used to break the glasses, enable the cutting machine to cut the next piece, high effeciency.


KeyWords: